A vertical form, fill and seal machine for producing centre sealed sachets handling all types of free flowing/non-free flowing powders/granules. The model MB-20 handles a single reel film stock. Max. reel width is 300 mm on 76 mm core. The machine has the facility to be provided with a variety of filling heads. Draw down of the film is through puller wheels controlled through a Electromagnetic Clutch Brake Combination. The length of the bag is controlled by print registration system which is PLC based. For unprinted film, the bag length can be adjusted from the single touch key pad provided on the front panel
Filling Systems
Volumetric Slide Filler
Auger Filler Option:
Either Clutch Brake Control or Servo Motor Driven Control
From 1 gm to 250 gms depending upon bulk density of products & the fill weight the maximum pouch size can take.
Output
Up to 60 packs per minute depending on product flow properties and pack size
Pack Size
Width: From 30 mm to 140 mm
Length: From 70 mm to 200 mm
Special Features
• FFS Machine with Intermittent Motion • PLC based Control with MMI
• Puller Wheels with Clutch Brake Control • Pneumatic Actuated Horizontal & Vertical Jaws
• Tool-less Roll Unwind
Packaging Materials
The machine will accept most types of laminated films up to maximum of 300 gauge. It is important that the sealing medium incorporates the best possible slip characteristics. Pure unsupported polyethylene film may be used with special impulse sealing equipment.
Dimensions & Weight
Electricals
Power Input: 3 Phase 415 V AC, 50 Hz
Motor: 0.5 to 1.0 HP, 3 Phase 415 V Motor • Option: VFD Controls
Heaters: Cartridge type 300 w x 3 pcs.
Temperature Control: Digital Temperature Controller with FEK Thermocouple
Fully Automatic Photo Cell Control System
Dimensions & Weight
Floor Area
1000 mm x 1600 mm
Height
1900 mm with Hopper
Nett Weight
400 kgs
Air
5.5 kg/cm2g
Optional Extras
Take off conveyor, batching device, coding, perforator between sachets, over-printing attachment, gas flushing and infeed product elevator system.
